The BREEZAIRE WKSL Series cooling systems is a special split system that allows for mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. These systems are designed – when installed in a properly constructed enclosure – to provide a constant selectable temperature between 48 and 63 degrees Fahrenheit while maintaining 50 to 75 percent relative humidity. FREE SHIPPING!
Split system design provides flexibility needed to create an ideal installation or deal with unusual site problems
Allows mounting of the cooling (evaporator) module in the enclosure to be cooled
Allows the exhaust (condenser) module to be as far as 50 feet away
Accurate, easy to adjust temperature set points with continuous LED cabinet temperature display
Blocked airflow protection shuts down unit and protects wine in case of high temperatures caused by blockage or fan failure
.jpg)
.jpg)
The WKSL Series wine cellar cooling system is a simple split system design that is extremely easy to install by a qualified air conditioning or refrigeration service technician. A mechanical line set – basically two copper tubes – connect the two modules. Both units are hard wired – 110 AC volt electrical source. These cooling units arrive uncharged and must be charged with refrigerant during the installation process. FREE SHIPPING!
The Cold Air UP inside the cellar is an available option when the Evaporator within the cellar needs to be positioned lower down, closer to the floor. To make this modification, you simply need re-position a cover plate on site to allow for the cold air to be directed upwards.
IMPORTANT INSTALLATION INFORMATION – The WKSL4000 can now have a maximum of 50ft of line set (previously the earlier versions of the WKS4000 allowed for 100ft).
The WKSL2200 & WKSL4000 are available in 230V/ 50Hz/ 2Phase, please inquire about the WKSL2150 & WKSL3350.
The L series now allows for digital display on your split system.
SENTRY III CONTROL SYSTEM FEATURES
Large, easy to read, cool green LED display
Accurate, easy to adjust temperature set points with continuous display of cabinet temperature.
Power outage protection.
Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure.
Controls temperature by enclosure (cellar) air sensors or optional bottle probe.
The BTU/h value shown here is a theoretical number.
| Cabinet/Enclosure Size: | Approx. 1000 cu. ft. *not rated |
|---|---|
| BTU/H: | 4000 |
| Condenser Dimensions: | 14.25”W x 19.75”H x 12.375”D |
| Evaporator Dimensions: | 14.25”W x 19.75”H x 12.375”D |
| Voltage Rating: | 110 V / 60 Hz |
| Weight: | 45lbs (Evaporator) 55lbs (Condenser) |
| Amps: | 1.5 Amp (Evaporator) 7.5 Amps (Condenser) |
| Temp. Delta: | Can maintain a 55°F cellar temperature |
| Installation: | Split |
| Humidity Control: | Automatic |
Click here for Installation Instructions: Click here
Warranty Information: Click here
1-year labor / 5-year parts
For Controller Owners Manual: Click here
.jpg)
.jpg)